Liquinox Concentrated anionic detergent for decontaminating equipment.
Description:
Landfill-biodegradable nitrile disposable gloves that provide comfort, dexterity and protection from chemicals.
Once these landfill-biodegradable nitrile gloves are disposed of to landfill, biodegradation is accelerated approximately 90%+ faster than conventional nitrile gloves, producing an organic matter (a natural fertiliser) and no microplastics.
Low-Flow Sampling has been the preferred method of choice for many years now in Australia for groundwater sampling. Now you can use disposable bladders responsibly by choosing our landfill biodegradable bladders.
Fieldtech Solutions has developed landfill-biodegradable concertina style bladders, and also tube style bladders for 2 of the most popular low-flow groundwater sampling pumps. These bladders have the same biodegradable additive as our other disposable sampling products so that they will biodegrade once disposed to a landfill.
*Concertina style bladders now also available in HDPE*
These polyethylene bladders will biodegrade in a landfill as per ASTM D5511, and are specifically designed for low-flow groundwater sampling pumps which use concertina style bladders, or tube style bladders.
Independent laboratory testing confirms that our bladders detected less than LOR for PFAS, based on analysis for 28 different PFCs.
Available in a pack of 10 for concertina style bladders, or 12 pack tube style bladders.
They are convenient and easy to change in the field.
Silicone tubing is available in various dimensions to suit sampling applications.
Description:
LNAPL Skimming Socks for 50mm Monitoring Wells
The easiest way to remove small amounts of fuels from monitoring wells is with these low-cost skimming socks. Each sock holds about 500ml.
Specifications:
Used for vapour sampling beneath a concrete slab and monitoring of vapour intrusion.
The hollow vapour sampling point is designed to be installed into a 16 mm diameter hole through a concrete slab. It protrudes out the bottom of the slab to allow vapours to be drawn up through the centre of it for detection testing or sample collection. The sampling points can be extracted and reused.
The vapour sampling points are inserted into position using a silicon sleeve. This forms a seal between the slab and the vapour sampling point. A push on cap keeps it sealed off when not in use.
Vapour Pins and their associated accessories – caps, plastic and stainless steel covers, silicone sleeves – are available for purchase here at Enqip.
The Stericup vacuum filtration system combines a Steritop filter unit with a receiver flask for processing and storing volumes from 150 mL to 1,000 mL..
Description:
The Stericup vacuum filtration system combines a Steritop filter unit with a receiver flask for processing and storing volumes from 150 mL to 1,000 mL. Its new no tip/easy grip flask design and compact profile improve stability during filtration, make gripping the receiver easier, and make Stericup Filter Units ideal for use in laminar flow hoods.
As an added convenience, the bottom of the receiver flask is slightly recessed, enabling capped flasks to be stacked for convenient storage
An environmental monitoring well cap or plug made from recycled plastic for sustainability.
The TriCap provides:
The TriCap is made from recycled plastic and enables a groundwater monitoring well, or a gas well to be sealed and locked. Operation of the TriCap is by turning the wing-nut shaft, during which the black rubber seal expands and pushes against the inner wall of the monitoring well casing, and gripping tight to form a seal. It can be locked in place with a padlock to restrict the turning of the wing nutted shaft, so it cannot be unscrewed and removed. Or it can locked in place with a stainless steel security bolt, which restricts the turning of the wing nutted shaft.
The TriCap-GAS has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. The TriCapGas can also be locked in place with a padlock or by using a security screw or both for extra security.
The TriCap has a partially hollow shaft that intersects a horizontal side hole near the bottom. This allows the well gas to be drawn in through the side hole and out the top.
The side hole also serves to hang sampling or monitoring devices off the bottom of the cap while at the same time gas samples can be taken out through the shaft and out the gas quick connect fitting.
Specifications: