Description:
Surface active cleaning agent, and/or radioactive decontaminant, for laboratory, medical and industrial applications.
Supplied as a liquid concentrate, for dilution with water. For ‘manual’ cleaning, or for use in an ultrasonic cleaning bath.
An emulsion of anionic and non-ionic surface active agents, stabilising agents, non-phosphate detergent builders, alkalis and sequestering agents, in an aqueous base. Decon 90 does NOT contain Phosphates, Enzymes, EDTA/NTA or Chlorine Bleaches.
Supplied in 5 litre high density polyethylene containers, with “tamper-evident”, screw-on caps.
Used for vapour sampling beneath a concrete slab and monitoring of vapour intrusion.
The hollow vapour sampling point is designed to be installed into a 16 mm diameter hole through a concrete slab. It protrudes out the bottom of the slab to allow vapours to be drawn up through the centre of it for detection testing or sample collection. The sampling points can be extracted and reused.
The vapour sampling points are inserted into position using a silicon sleeve. This forms a seal between the slab and the vapour sampling point. A push on cap keeps it sealed off when not in use.
Vapour Pins and their associated accessories – caps, plastic and stainless steel covers, silicone sleeves – are available for purchase here at Enqip.
Description:
Description:
Available sizes:
1/4″ & 3/8″ OD bonded tubing
5/8″ OD ‘Waterra’ tubing
1/2″ OD tubing
3/8″ OD tubing
1/4″ OD tubing
All tubing sold in 100 m rolls on a cardboard spool
Description:
The HydraSleeve “No-Purge” groundwater sampler can cut field sampling cost and your carbon footprint by 50 to 80%!
The HydraSleeve makes groundwater sampling a simple, three-step operation that is more effective than bailers, passive diffusion bags, portable or dedicated pumps.
The low-cost, disposable HydraSleeve captures a “core” of water from any discrete interval in the screened portion of the well with no change in water level and minimal disturbance to the water column.
Hydrasleeve 0.5 L 1.75″ Diameter x 28″
Hydrasleeve 1 L 1.75″ Diameter x 36″
Hydrasleeve Spring Clip for 2″
Weight for Hydrasleeve, 80 mm x 25 mm diameter, 250g
