The FLIR E5-XT is the perfect tool for quickly locating hot and cold spot measurements, and diagnosing electrical, mechanical, and building problems. Thanks to its 19,200 (160 × 120) pixel infrared detector, expanded, -20°C to 400°C temperature range, thermal resolution ±2% accuracy and FLIR MSX® image enhancement, it provides extraordinary thermal imaging detail. Images can be downloaded via USB for sharing and inclusion in reports.
The 04 Series toxic single gas monitor is designed to operate for many years. The HCN, NO2, SO2, PH3 and NH3 versions can be operated continuously for at least 3,000 hours on (2) AAA size alkaline batteries. The 04 models have 2 preset alarms that are user adjustable. Each version is also equipped with visual, audible, and vibration alarms as standard.
This single gas monitor is designed to operate for many years. These models have 2 preset alarms that are user adjustable. Each version is also equipped with visual, audible, and vibration alarms as standard.
Sensors have a life expectancy of over 3 years and backed by a 3 Year Warranty.
Each 04 Series monitor is impact, dust, and water resistant with an IP-67 rating. 04 Series instruments are safe for use in hazardous locations, classified as intrinsically safe IECEx/ATEX.
Quick Specs
The on/off-style 5 to 5000 ml/min sampling pump with graphic display and touch screen for the easiest operation and highest value. No flow rate adjustment tools or manual needed!
Quick Specs
Wall mounted indoor CO2 Monitor with 3 Colour LED Digital Display
Description:
The model RI-600 is an indoor, standalone monitor that detects Carbon Dioxide (CO2) with multiple ranges up to 10000 ppm alternatively can be purchased in vol%. It’s sleek, low-profile design is equipped with a unique tri-colour display, which changes colour as Carbon Dioxide levels reach each alarm level. It is capable of operating with two different power options; 24 VDC or alkaline batteries. The RI-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket. If Carbon Dioxide is present, the user is notified by an audible alarm tone and the multicoloured LED digital display.
The RI-600 uses a Non-Dispersive Infrared Ray (NDIR) sensor. This long life sensor is field-replaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable. This device is designed to replace large, bulky monitors and should be used to monitor small areas.
Quick Specs:
Wall mounted indoor CO2 and Temperature Monitor
Description:
Quick Specs:
